Sweeper/Scrubber
Curtis Products for the Sweeper/Scrubber IndustrySystems Control |
| Model 1310 Vehicle System Controller The latest generation of Curtis controllers, AC, allows for dynamic system configuration with embedded VCL. The new Curtis Vehicle Controller, Model 1310, extends this capability to other Curtis controllers. It is a single-point "Master" control of multiple vehicle functions which can be applied to electric vehicles, non-electric vehicles and stationary control systems. Model 1310 works in conjunction with Curtis CAN-based motor controllers and other CAN-open devices. It uses the industry standard 2-wire CAN-bus technology and integrates digital and analog signals with application- specific software.
|
|
| Model 1352 eXM The Curtis Model 1352 eXM CANbus Hydraulic Input/Output Expansion Module can be added to any CANbus based control system utilizing the CANopen communication bus protocol. It provides a simple, flexible and cost effective method of controlling up to 6 proportional hydraulic valves, or can be used to connect additional digital and analog I/O to a CANbus system.
|
|
Programming |
| Model 1311 LP Handheld Programmer Provides simple and intuitive programming, testing and diagnosing of Curtis motor controllers and auxiliary devices. The low power enhancement recently added to this programmer significantly reduces its power consumption and improves connection to Curtis Model 1214/15/19 and 1207 controllers.
|
|
| Model 1314 PC Programming Station Powerful Windows® interface for adjusting settings, troubleshooting and recording the parameters of any Curtis product with a serial or CAN-bus interface. Model 1314 is compatible with all microprocessor- based Curtis motor controllers and chargers.
|
|
AC Motor Controllers |
| Model 1230 Low-power AC controller. Ideal for electric pallet movers and other small electric vehicles.
|
|
| Model 1234 Optimized for smaller industrial vehicles and larger pallet movers. VCL and CAN optional package for advanced system designs.
|
|
| Model 1236 Mid-power AC controller with VCL and CAN; fully featured for a wide range of Material Handling and Industrial Vehicles including single/dual drive and pump control.
|
|
SEPEX Motor Controllers |
| Models 1243 and 1243 CAN For pallet movers, order picker and other medium power material handling vehicles. CAN bus connectivity allows advanced vehicle control and integration.
|
|
Permanent Magnet Motor Controllers |
| Model 1210 24 V, 45 and 70A
|
|
Models 1225/1235
|
|
Models 1227/1237
|
|
Models 1228 and 1228S
|
|
enGage Instrumentation |
| 3100T The Curtis enGage® Model 3100T is a microprocessor based instrument that monitors and displays operating and performance parameters critical to industrial vehicles. The gauge is fully compatible with CAN (Open, J1939) controller area network protocol.
|
| enGage II The Curtis enGage™ II is a dual function, microprocessor based instrument that can be factory or user defined to monitor various functions including fuel, temperature, pressure, voltage, battery state of charge and maintenance/status.
|
|
| enGage III The Curtis enGage™ III is a three function, microprocessor based instrument that can be factory or user defined to monitor various functions, including fuel, temperature, pressure, voltage, battery state of charge and maintenance/status. 2 versions: 12VDC, no buttons, no backlighting 12-48VDC, with buttons, with backlighting
|
|
| enGage IV enGage IV allows at-a-glance determination of vehicle status. |
|
| enGageI™ I Voltmeter The enGageI™ I Voltmeter is ideal for use in a variety of battery powered applications including those associated with durable medical and material handling vehicles.
|
|
| Model 3100R e2-based, two-function programmable round gauge with CAN.
|
|
Cased Hour Meters and Counters |
| 700 Series Highly reliable solid-state hour meters and counters that offer an unprecedented combination of patented technology, performance, reliability and value. Ideal for a wide variety of industrial and commercial applications, including scheduled maintenance, warranty and leasing - for medical equipment, transport and industrial vehicles and other industrial equipment.
|
|
Battery Discharge Indicators and Combination Gauges |
| IC Series Engine monitoring instruments. Complete line of solid state display products in a variety of housings and configurations from fully assembledpanels and 52 mm round gauges to individual printedcircuit board based modules.Configure your own IC panel.
|
|
| Model 841 Vehicle controller monitor. BDI with error code & hour meter.
|
|
| Model 900R Battery "fuel" gauge is low cost and easy to install. It is a single piece package and installs via a simple 2 wire connection.
|
|
| Model 933/3D Battery "fuel" gage and controller with lift lockout and adjustable reset and discharge settings. These proven instruments, with more than a half-million units installed, feature a rugged aluminum controller for reliable operation, even in the most severe conditions.
|
|
| Model 803 Battery Discharge Indicator/Hour Meter with Lift Lockout Combines in one instrument a completely solid-state battery discharge indicator, an LCD hour meter and lift lockout, housed in a 52 mm case. Indicates state-of-charge in 10-bar LED display. Void of moving parts, this instrument is exceptionally reliable even in severe operating environments. Suitable for all electric vehicles.
|
|
| Model 840 Serial Data Display Indicates various system parameters, such as battery state-of-charge, operating hours or maintenance status. Communicates directly with Curtis motor controller Model 1297 or other serial communication device. Ideal for use in material handling and order pickers, as well as other equipment with a need to display data using a dedicated unidirectional asynchronous serial signal. 8-character dot matrix LCD. Choice of 3 or 6 warning LEDs with optional backlighting and freezer versions.
|
|
| Model 906 Battery Discharge Indicator Battery "Fuel Gauge" indicates state-of-charge in 10-bar LED display. Solid-state. Easy to install. Ideal for golf cars, commercial cleaning equipment, mobility aids, electric bicycles, electric marine motors, medical devices and many other applications. Available in five panel-mount packages and a printed circuit board mounted module.
|
|
Battery Chargers |
| Model 1621 High-frequency charger 85-265VAC/ 24-96VDC, 9-25A.
|
|
DC/DC Converters |
| 1400 Series DC/DC Converters Available in both 250 W peak (Model 1410) and 375 W peak (Model 1400) ratings.
|
|
Warning Devices |
| Alarms Curtis multi-voltage audible alarms are designed to protect people working in proximity to material handling equipment and other types of vehicles. Available in voltages from 12 V to 72 V with output of 87 to 97 dBa. 12 to 48 V is available with output between 82 dB and 107 dB. Environmentally protected for use indoors and out, Curtis alarms can operate in temperatures ranging from -40 to +77°C.
|
|
| Beacons A range of high-efficiency xenon visual warning lights 12 to 72 V and 12 to 80 V, 2 W and 5 W. Curtis safety beacons are designed for applications ranging from pallet trucks; construction and airport equipment; agricultural equipment; and forklift trucks - internal combustion or electric powered.
|
|
Electrical Devices |
| DC Contactors High-quality Curtis/Albright contactors for vehicle and industrial applications are available at ratings of 100, 125, 150 and 250 A. Millions are in use worldwide, proven in the toughest conditions. Built for reliability, these units feature high continuous ratings in compact, durable packages. Coils are available from 6 to 240 V.
|
|
| Emergency Disconnect Switches Reliable double-pole and single-pole disconnect switches provide a rapid means of manually disconnecting batteries - or other power supplies - in the event of serious electrical faults.
|
|
Input Devices |
| Foot Pedals Ideal for tough environments such as material handling, Curtis foot pedals are used with Curtis electronic motor speed controllers, as well as models by other manufacturers. Designed for maximum installation flexibility and durability, these pedals are made of rugged aluminum castings. |
|
| Pot Assemblies Wig-Wag throttles which provide an output for motion in both directions. A conductive plastic element in conjunction with unique wiper and shaft support design provides a durable throttle with longer mechanical life.
|
|
| Tiller Heads Attractive, ergonomic and practical function control handles used in pallet jacks, walkie-stackers and tow tractors. These control heads include an electronic throttle mechanism and an emergency switch, and may be equipped with a variety of functional options, including switches (horn, lift, lower, coast), throttle and instrumentation.
|
|
| Electronic Code Switch Electronic Code Switch 12-120VDC, 12 button, programmable. The Electronic Code Switch is designed for safe machine control and to help prevent unauthorized access use of the machine.
|
|